___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

 

___________________________________________________________________________

 

                     





___________________________________________________________________________

 

___________________________________________________________________________

samsung c165-c166 keypad solution




___________________________________________________________________________

___________________________________________________________________________

Here are the instructions to Subsidy Unlock the LG CT810 (Incite) from AT&T:

* Go to the Dial Menu (as if you were making a phone call)
* Using the dial pad enter: 2945#*810#
* A SIM Unlock screen will appear with a number pad
* Enter the 16-digit unlock code*
* Select Ok
* Device will display Handset sucessfully unlocked


http://www.youtube.com/watch?v=3RoQ__V3028


*The 16 digit code can be obtained by calling AT&T Technical Support and given the representative the IMEI number. In exchange they will give you the Subsidy Unlock Code.

To obtain the IMEI number press *#06# on your mobile device.



___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

How to unlock KS360 :

Thanks goes to Blackhorn


Between the retrieval and sending files, the phone should not be started!
Launch KS360-Utils
Choose "N"-Recover partition STATIC_EEP from phone
Enter the USB port
Then where is the file KS360_psi.flb
And finally where we want to retrieve the file STATIC_EEP
In my example I just called the file STATICEEP.
Then, we mod the file with the KS360-Utils to add the operator or operators of our choice.
To do this choose "O":-Unlocking
Enter the file path STATIC_EEP
To the question upgrade? Type "O"
Then specify the operator you are interested with its number.(Ex:SFR FR = 20810)I suggest to add all operators from your country
Enter the number and press Enter
Note the last line ... Just push ENTER don't enter operator code ==> to say that I finished.
Then you must return the file STATIC_EEP on the phone to apply the unlock process.
To do this select "M" - Send the partition STATIC_EEP
Enter the USB port
Then the location of the file KS360_psi.flb
And finally the STATIC_EEP
Connect your phone, it sends just a few seconds (less than 3 seconds ...)
Once the last line indicated "closed port" you can disconnect.
Turn your phone on.... And voila!
Your phone is unlocked to the operator of your choice!







___________________________________________________________________________

___________________________________________________________________________

                                                 I phone 3G & 2G Difference



___________________________________________________________________________

 

 

DFU (Device Firmware Upgrade) mode is not the same as restore mode. DFU mode bypasses the current OS installed and allows you to upgrade or downgrade your OS. If you are getting errors trying to restore in iTunes, DFU mode is very likely for you.

This is how to achieve DFU mode. You can do it on every phone:

NOTE : It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long!

Step 1. Connect iphone to USB then listen to the sound when it connect and disconnect.

Step 2. Hold the home and power buttons until hear the disconnect sound then release power button.

Step 3. Wait until you hear another sound then release home button.

Alternate Method: Going Into DFU Mode Without Button Pushing: (on windows) Easier than timing the buttons just right!


1.) First download the required archive http://www.sendspace.com/file/93fx93

2.) Extract the archive to the root of your hard drive, should be C:/DFU/

3.) Connect your iPhone and ignore iTunes

4.) Goto Start - run

5.) Next type in “c:/dfu/dfu iBSS.m68ap.RELEASE.dfu”

6.) Wait for iPhone to show a “white” screen

7.) Now you may proceed to downgrade!





___________________________________________________________________________

smart phone reset cod collections 2009


If u Like My Post Than Click On Google Ads Thats R On My Site.





___________________________________________________________________________